Industrial Water Treatment Profile

pHBal 2.O

Category: Industrial Water Treatment Available in: Pakistan Grade: Industrial Water Treatment Grade

Pakistan

Quote Based Supply

pH correction route for acidic or alkaline water streams where neutralization is needed before treatment or discharge.

Origin: Pakistan Serving Areas: Pakistan Status: In Stock

Grade: Industrial Water Treatment Grade

Request Quote Open Enquiry Portal

Overview

Commercial, technical, and application notes stay visible in one clean product view for desktop and mobile.

pH correction route for acidic or alkaline water streams where neutralization is needed before treatment or discharge.

Application

Wastewater pH correction, process water neutralization, post-cleaning pH recovery, and general water-treatment pH adjustment.

Usage Notes

Choose acid or alkali route from submitted pH, alkalinity, flow, and target pH. Confirm dosing point, mixing, and pH controller calibration.

Standard Control Values

General pH: 6.5-8.5
Wastewater pH: 6.5-9.0 screening
Cooling pH: 7.2-9.0

Dosing Direction

Guide: calculate by pH, alkalinity, flow, and target pH. Field titration is required before final dosing ratio.

Highlights

Corrects pH before treatment
Supports neutralization reports
Useful with coagulant and cleaning programs

Technical verification: Final product selection, dose rate, compatibility, handling, and quotation must be approved against the latest site data and SDS.

Safety and Environment Signals

Selected signs help buyers quickly read product hazard, handling, PPE, or environmental impact context before quotation.

Corrosion Corrosive to metals, skin, or eyes.

Water treatment fit

A membrane-treatment hub for antiscalants, membrane cleaners, feedwater risk, scaling control, CIP planning, and linked RO product pages.

Feedwater Risk Review Antiscalant selection depends on hardness, silica, iron, barium, strontium, alkalinity, recovery, and membrane type.

Scale Control Dose and product choice should be checked against recovery and concentrate chemistry rather than feedwater alone.

Cleaning Strategy Acidic, alkaline, or specialty cleaning should match foulant type and membrane compatibility.

Feed TDS Hardness Silica Iron / manganese SDI / turbidity Permeate conductivity

Client Quotation Form

Water treatment request for RO Membrane Water Treatment Chemicals

RO review needs feed analysis, recovery, membrane model, pretreatment condition, pressure/flow trend, antiscalant dose, and permeate quality before final antiscalant or cleaning recommendation.

Admin review needs

Feedwater analysis including TDS, hardness, silica, iron, alkalinity, and pH.
RO capacity, recovery, membrane model, number of membranes, and operating pressure.
Current antiscalant, dose, cleaning history, and membrane age.
Current problem such as scaling, low flow, high pressure, high permeate TDS, or frequent CIP.
Site city, packing requirement, and monthly chemical consumption.

Open Client Quotation Form Tap to share water analysis, product need, and site details

Report Focus RO Membrane Water Treatment Recommendation Report

RO limits depend on membrane model, recovery, antiscalant, pretreatment, and normalized plant data. Use for screening before projection/software confirmation.

pH TDS Conductivity Total Hardness as CaCO3 Total Alkalinity as CaCO3 Silica Iron Manganese Turbidity SDI Residual Chlorine RO Recovery

Category-specific judgment points

What are the membrane model, element count, recovery, feed pressure, and permeate flow?
Is free chlorine present before the membrane and how is dechlorination controlled?
What are the latest feed silica, hardness, alkalinity, iron, manganese, SDI, and turbidity values?
What changed in normalized flow, salt passage, or pressure drop?

Name Company / Plant Email WhatsApp / Phone Country City / Site Location Water Treatment Category Request Type Product / Chemical / Category Required System / Plant Type Water Source Capacity / Flow / Pressure Required Quantity / Packing Urgency Preferred Contact Current Problem / Goal Water Test Values

Optional Water Analysis Parameters

Priority values are selected for RO Membrane Water Treatment Chemicals. Fill any available lab or site values; uploads can carry the full report.

pH TDS (mg/L) Conductivity (uS/cm) Total Hardness as CaCO3 (mg/L) Calcium Hardness (mg/L) Magnesium Hardness (mg/L) Total Alkalinity as CaCO3 (mg/L) Chloride (mg/L) Sulfate (mg/L) Sulphite / Sulfite Residual (mg/L) Phosphate (mg/L) Nitrite Level (mg/L) Nitrate (mg/L) Silica (mg/L) Iron (mg/L) Manganese (mg/L) Turbidity (NTU) SDI TSS (mg/L) COD (mg/L) BOD (mg/L) Residual Chlorine (mg/L) Dissolved Oxygen (mg/L) ORP (mV) Temperature (C) Cycles of Concentration RO Recovery (%) Permeate Conductivity (uS/cm) Oil and Grease (mg/L) Color (Pt-Co) Microbiology / Bacteria (CFU/mL)

Attach Water Report / Photos / PDF / Word File Optional. Upload lab report, site photos, PDF, Word, Excel, CSV, or text files up to 12 MB each. Current Chemicals / Dose Consultation Need Additional Notes

I confirm these details are accurate enough for ALKEMIST to review the quotation or consultation request.

Use General Enquiry Portal

Prepared Product Data

Technical, commercial, and catalog-ready information is aligned in one section so buyers can scan it quickly.

Category	Industrial Water Treatment, RO / Membrane Treatment
Product Type	Simple
Stock Status	In Stock
Price Mode	Quote Based
SKU	ALK-WT-PH-BAL-2O
Grade	Industrial Water Treatment Grade
Packing / Packaging	25 kg, 30 kg, 200 kg, or site packing on request
Storage Condition	Keep sealed, labeled, shaded, and stored according to SDS.
Available In	Pakistan
Serving Areas	Pakistan

FAQ

What is pHBal 2.O used for in Pakistan?

pHBal 2.O is listed as a Industrial Water Treatment. pH correction route for acidic or alkaline water streams where neutralization is needed before treatment or discharge. Grade: Industrial Water Treatment Grade.

Where is pHBal 2.O available?

Available in Pakistan. Serving areas include Pakistan.

What product identifiers are available for pHBal 2.O?

SKU: ALK-WT-PH-BAL-2O. Grade: Industrial Water Treatment Grade.

How can buyers request a quote for pHBal 2.O?

Use the quote or enquiry action on this page to send a Pakistan market enquiry directly: https://waterchemicalssolution.com/enquiry-portal/?product_id=31949&product_name=pHBal%202.O&type=Industrial%20Water%20Treatment&grade=Industrial%20Water%20Treatment%20Grade&market=Pakistan&serving_areas=Pakistan&supplier_context=ALKEMIST%20|%20Dealer%20/%20Seller%20in%20Pakistan