Wastewater / Effluent Treatment Profile

Flocreat 2.O

Category: Wastewater / Effluent Treatment Available in: Pakistan Grade: Industrial Water Treatment Grade

Pakistan

Quote Based Supply

Polymer flocculant support for settling, sludge dewatering, filtration aid, and clarification after jar testing.

Origin: Pakistan Serving Areas: Pakistan Status: In Stock

Grade: Industrial Water Treatment Grade

Request Quote Open Enquiry Portal

Overview

Commercial, technical, and application notes stay visible in one clean product view for desktop and mobile.

Polymer flocculant support for settling, sludge dewatering, filtration aid, and clarification after jar testing.

Application

Wastewater clarifiers, sludge settling, DAF support, filter press conditioning, and sample-based flocculation trials.

Usage Notes

Select anionic, cationic, or non-ionic polymer from jar test. Avoid overfeed that creates pin floc, carryover, or poor dewatering.

Standard Control Values

Settling time: Jar-test target
TSS: <= 30 mg/L screening
Sludge quality: Stable floc

Dosing Direction

Jar-test guide: 1-20 mg/L active polymer equivalent; prepare dilute solution and verify floc size.

Highlights

Settling and dewatering aid
Charge selection by jar test
Pairs with Claritreat 2.O

Technical verification: Final product selection, dose rate, compatibility, handling, and quotation must be approved against the latest site data and SDS.

Safety and Environment Signals

Selected signs help buyers quickly read product hazard, handling, PPE, or environmental impact context before quotation.

Exclamation Mark Irritation, sensitization, or less severe acute hazards.

Water treatment fit

A wastewater-treatment hub for coagulation, flocculation, pH adjustment, sludge handling, color removal, testing, and linked effluent-treatment products.

Jar Test First Chemical selection is strongest when dose, settling, color, turbidity, and sludge behavior are checked with representative samples.

Coagulation / Flocculation Coagulants and polymers are matched to suspended solids, charge, pH, color, and settling goals.

pH and Neutralization pH control improves treatment efficiency and helps keep discharge preparation within the required operating window.

pH Turbidity COD / BOD where available TSS Color Sludge settling

Client Quotation Form

Water treatment request for Wastewater Effluent Treatment Chemicals

Wastewater review needs source/process details, flow, pH, TSS/turbidity, COD/BOD, oil and grease, color, target discharge, sludge behavior, and jar-test observations.

Admin review needs

Effluent source and process type.
Flow rate, daily volume, and operating hours.
Current pH, turbidity, TSS, COD/BOD if available, and sample photos.
Current chemicals, dose, and treatment result.
Target result, discharge requirement, and sludge handling method.

Open Client Quotation Form Tap to share water analysis, product need, and site details

Report Focus Wastewater Effluent Treatment Recommendation Report

Discharge limits vary by consent, industry, and country. Use for treatment selection and confirm final compliance limits separately.

pH TSS Turbidity COD BOD Oil and Grease Color Conductivity Phosphate Nitrate

Category-specific judgment points

What is the effluent source and daily/hourly flow?
What target must be met for pH, TSS, turbidity, COD/BOD, oil and grease, color, or discharge consent?
Has jar testing been done, and what dose gave the best settling and clarity?
How is sludge handled and what problem exists after treatment?

Name Company / Plant Email WhatsApp / Phone Country City / Site Location Water Treatment Category Request Type Product / Chemical / Category Required System / Plant Type Water Source Capacity / Flow / Pressure Required Quantity / Packing Urgency Preferred Contact Current Problem / Goal Water Test Values

Optional Water Analysis Parameters

Priority values are selected for Wastewater Effluent Treatment Chemicals. Fill any available lab or site values; uploads can carry the full report.

pH TDS (mg/L) Conductivity (uS/cm) Total Hardness as CaCO3 (mg/L) Calcium Hardness (mg/L) Magnesium Hardness (mg/L) Total Alkalinity as CaCO3 (mg/L) Chloride (mg/L) Sulfate (mg/L) Sulphite / Sulfite Residual (mg/L) Phosphate (mg/L) Nitrite Level (mg/L) Nitrate (mg/L) Silica (mg/L) Iron (mg/L) Manganese (mg/L) Turbidity (NTU) SDI TSS (mg/L) COD (mg/L) BOD (mg/L) Residual Chlorine (mg/L) Dissolved Oxygen (mg/L) ORP (mV) Temperature (C) Cycles of Concentration RO Recovery (%) Permeate Conductivity (uS/cm) Oil and Grease (mg/L) Color (Pt-Co) Microbiology / Bacteria (CFU/mL)

Attach Water Report / Photos / PDF / Word File Optional. Upload lab report, site photos, PDF, Word, Excel, CSV, or text files up to 12 MB each. Current Chemicals / Dose Consultation Need Additional Notes

I confirm these details are accurate enough for ALKEMIST to review the quotation or consultation request.

Use General Enquiry Portal

Prepared Product Data

Technical, commercial, and catalog-ready information is aligned in one section so buyers can scan it quickly.

Category	Wastewater / Effluent Treatment, Water Treatment Chemicals
Product Type	Simple
Stock Status	In Stock
Price Mode	Quote Based
SKU	ALK-WT-WW-FLOC-2O
Grade	Industrial Water Treatment Grade
Packing / Packaging	25 kg, 30 kg, 200 kg, or site packing on request
Storage Condition	Keep sealed, labeled, shaded, and stored according to SDS.
Available In	Pakistan
Serving Areas	Pakistan

FAQ

What is Flocreat 2.O used for in Pakistan?

Flocreat 2.O is listed as a Wastewater / Effluent Treatment. Polymer flocculant support for settling, sludge dewatering, filtration aid, and clarification after jar testing. Grade: Industrial Water Treatment Grade.

Where is Flocreat 2.O available?

Available in Pakistan. Serving areas include Pakistan.

What product identifiers are available for Flocreat 2.O?

SKU: ALK-WT-WW-FLOC-2O. Grade: Industrial Water Treatment Grade.

How can buyers request a quote for Flocreat 2.O?

Use the quote or enquiry action on this page to send a Pakistan market enquiry directly: https://waterchemicalssolution.com/enquiry-portal/?product_id=31948&product_name=Flocreat%202.O&type=Wastewater%20/%20Effluent%20Treatment&grade=Industrial%20Water%20Treatment%20Grade&market=Pakistan&serving_areas=Pakistan&supplier_context=ALKEMIST%20|%20Dealer%20/%20Seller%20in%20Pakistan